本产品是一种无溶剂反应的双组份的聚氨酯胶黏剂。具有非常高的粘接强度，所以特别适用于工业厂房及高负载的地板施工中。
2-Component polyurethane Adhesivefor heavy - duty floor.Highest bond- strength, therefore extremely reliable for almost any loading.
■基层处理：
•使用前，请打开大桶(12.5kg),然后将小桶（2.5kg）中的组份彻底倒入大桶并用合适的电动搅拌器（螺旋式、桨式或笼式搅拌器）充分搅拌本品。随后将充分搅拌的混合物倒入另一只干净的容器，并再次稍作搅拌。确保充分搅拌，尤其应注意桶壁和桶底部位。
•用合适的刮板将本品均匀涂布至基层表面。随后立即铺设地板，并对铺设区域全面擦压。2-3小时再次擦压地板。掌握合适的用量，确保粘合剂充分转移至地板背面，而地板又不“浮起”。在重载负荷区域、室外和潮湿区域铺设锥粒背衬地板时，在铺设地板前请用本品将锥粒背衬填平。请迅速施工，注意适用期。
■Application：
•Openthe big container(12.5kg) and fully pour the con tent of the smallcontainer(2.5kg)in to the big container. Thoroughly mix the two components withsuitable drill a attachment.Pour outthe mixed materials into a second,cleancontainer and briefly mix again.Ensure acomplete consistent.Streak-freemixture specially around the sides and bottom of the container.•Spreadthe adhesive evenly(see consumption) using a notched trowel. Lay in thecovering and rub down or roll well.Roll again after2-3hours.Ensure goodtransfer of adhesive onto the backing of flooring.Noresponsibility can be taken for the installed product.If indoubt, conduct a test or trial.Observe theNature product data Sheets.
■重要提示:
•凉爽、干燥的条件下在原包装内至少可保存12个月。最佳存储温度为15-25℃，避免冰冻。变稠沉淀的B组分已不能再使用。•最佳施工条件：气温18-25℃，地表温度高于15℃。过低或过高的温度会使铺设时间，固化时间及干燥时间相应延长或缩短。•未经充分搅拌的胶黏剂质地仍很柔软，并无强度。因此请搅拌数分钟，并且不要使用桶中的残留胶黏剂。
■ImportantNotes:
•Shelflife approx. 12 months in original packaging when stored in dry conditions.Before use allow the adhesive to come to room temperature.•Optimumconditions are 18-25℃，floor temperatures above 15℃ and relative humidity below75％. Low temperatures and high humidity lengthen, whilst high temperatures andlow humidity shorten the working.setting anddrying time.•Inadequatelymixed adhesive stays soft and has no strength,thereforeacclimatize the adhesive for several minutes,mix welland do not scrape out the container.
