NQ2000D超强导电地板胶

主要使用建筑物内各种导电,抗静电弹性地板(PVC,橡胶)卷材,片材地板与基础物粘接。

It can be used in the buildings for electric conductivity,anti-electrostatic bonding for plastic or Rubber sheet and tileto substrate Special for heavy-duty floor.

施工方法

• 使用前应搅拌均匀，建议用专用锯齿刮刀均匀地涂刮，铺展后凉胶时间20-60分钟(根据气候温度不同，可用手指触摸判断表干情况)即可铺设上述地板材料。

• 铺下地板后先用软木板，后用50kg以上滚筒滚压以排除残余的空气，确保胶水全部粘结附到地板背面。

• 24小时后可固化,48小时后可步行。

Application Instruction

• Stir thoroughly the product before use,apply it evenly on the surface of substrate by using K or TL toothed trowel. After short open time ol20-60 mins,the substrate is ready to accept above flooring material.

• After the fiooring material is applied on the substrate rub the surface by wood plate and roll by 50kg roller to remove entranced air under theflooring mate-rial. Make sure that adhesive has transferred to the back of the flooring material.

• The adhesive will be dried after 24hrs, and set to foot traffic after 48hrs.
  

理论涂布量   Theoretical application rate

K齿刮板 :250g/㎡

保质期   Quality Grarantee Period

在0-40℃库房内储存，保质期为12个月。

12 months if stored in 0-40℃.

注意事项   Notes

本品在运输，储存和施工过程中防止严寒及阳光暴晒，施工温度不低于5℃。

The product should be protected against frost and direct light during transportation, storage and application.Application temperature should not be lower than 5℃.

产品资料下载‍   File Download