■技术数据：
主要使用建筑物内各种导电，抗静电弹性地板（PVC，橡胶）卷材，片材地板与基础物粘接。
It can be used in the buildings forelectric conductivity,anti-electrostaticbonding for plastic or Rubber sheet and tile to substrate Special forheavy-duty floor.
■施工方法：
•使用前应搅拌均匀•建议用A1、A2或A3锯齿刀均匀地涂刮。•铺展后凉胶时间20-50分钟即可铺设地面材料，并用压辊碾压。
■ApplicationInstruction
•Stirthoroughly the product before use.•Applyit evenly on the surface of substrate by using A1、 A2 、A3 toothed trowel. •Afteropen time 20-50min,the substrate is ready to accept above flooring material.Rub the surface by wood plate and roll by roller.
■理论涂布量
A1齿刮板250g/m² A2齿刮板 330g/m² A3齿刮板 380g/m²
■Theoreticalapplication rate
A1 toothed trowel 250g/m² A2 toothed trowel 330g/m² A3 toothed trowel 380g/m²
■保质期：
在1-40℃库房内储存，保质期为12个月。
■QualityGraranteePeriod:
12 months if stored in 1-40℃。
■注意事项：
本品在运输，储存和施工过程中防止严寒及日光暴晒，施工温度不低于5℃。
■Notes:
The product should be protectedagainst frost and direct light during transportation, storage and application.Applicationtemperature should not be lower than 5℃.
