NQ2030水性全能强力地板胶

推荐用于PVC塑胶地板,厚度≤2mm橡胶地板卷材与基层的粘结。

It is recommended to be used in the building for bonding PVC flooring sheet and rubber flooring sheet(thickness≤2mm) to substrate.

施工方法   Application Instruction

1、使用前应搅拌均匀，建议用A1、A2或A3锯齿刀均匀地涂刮。

Stir thoroughly before use. Apply uniformly with an A1、A2 or A3 serrated trowel.

2、铺展后晾胶(根据气候温度不同,可用手指触摸判断表干情况)即可铺设PVC塑胶地板或2毫米橡胶地板。

Allow adhesive to dry to touch (check surface dryness by finger contact depending on ambient conditions) before installing PVC flooring or 2mm rubber flooring.

3、铺设地板后用小压辊压实,以排除残余的空气,确保胶水全部粘结附到地板背面。

After laying flooring, compact with a small hand roller to eliminate residual air and ensure full adhesive transfer to the flooring underside.

理论涂布量   Theoretical application rate

A1齿刮板 380g/m²，A2齿刮板 250g/m²，A3齿刮板380g/m²

A1 toothed trowel 380g/m²   A2 toothed trowel 250g/m²   A3 toothed trowel 380g/m²

保质期   Quality Grarantee Period

在1-40℃库房内储存，保质期为12个月。

12 months if stored in 1-40℃.

注意事项   Notes

本品在运输，储存和施工过程中防止严寒及阳光暴晒，施工温度不低于5℃。

The product should be protected against frost and direct light during transportation, storage and application. Application temperature should not be lower than 5℃.

产品资料下载‍   File Download